300m Remote Control Mini Dog Bark Collar

Product Description

The mini dog shock collar with remote consists of a receiver, a transmitter and a collar. The device is rechargeable and waterproof, then the battery has a long-lasting life, designed with built-in lithium battery. It's safe and adjustable, so you could cut out the collar in accordance with the size of you dog.

The mini bark collar appearance is designed small enough to be put in a box or your pocket when you are outside, just enjoy the amazing time playing with your beloved dog after a hearty meal.

Specification

Remote Distance: Up to 300 meters (without obstacles and interference)

Mode: Static shock/vibration/beep

Static shock & Vibration & Beep Level: 1-5

Collar Circumference (adjustable): 60cm

Collar Receiver Battery Capacity: 300mAh

Transmitter Battery Capacity: 300mAh

Note

Please read the instruction carefully if you use the product for the first time.

Training Advices

Proper fit of the collar is important! A collar too long or too tight on dog's neck may cause skin damage.

Avoid leaving the collar on the dog for 12 hours more per day. If possible, re-position the collar on the pet's neck every 1 to 2 hours.

Do not use high frequency vibration firstly. Make sure to use from level 1 not the level 5 at the beginning.

The Shock mode is recommended only in emergency situations and is not recommended as a form of active behavior training

How it Works

Power on the Remote Transmitter by pressing the On/Off button.

Press and hold the On/Off button of Receiver Collar for 5 seconds until a beep sounds, and the indicating light will begin to flash quickly, that means the Transmitter and receiver are Synchronized successfully.

Then you can use your remote transmitter to train your dogs.

Notice

The Synchronizing process has been completed when the product leaved the factory. If it is necessary to pair again,please check the manual.

Level 00 is not working, make sure to switch level into 01 to 05, Use "+" "-" to adjust the level.

The remote transmitter designed to use with two receiver, The default is Dog 1. You can press dog button to switch Dog 1 and Dog 2,